Asus 4924238 - P6T LGA 1366 Motherboard User Manual Download Page 55

Page: 55 / 182

2.8.2

Internal connectors

1. Floppy disk drive connector (34-1 pin FLOPPY)

This connector is for the provided floppy disk drive (FDD) signal cable. Insert

one end of the cable to this connector, then connect the other end to the

signal connector at the back of the floppy disk drive.

Pin 5 on the connector is removed to prevent incorrect cable connection when

using a FDD cable with a covered Pin 5.

2. TPM connector (20-1 pin TPM)

This connector supports a Trusted Platform Module (TPM) system, which can

securely store keys, digital certificates, passwords, and data. A TPM system

also helps enhance network security, protects digital identities, and ensures

platform integrity.

The TPM module is purchased separately.

The floppy cable is purchased separately.

ASUS P6T Deluxe V2

2-29

Summary of Contents for 4924238 - P6T LGA 1366 Motherboard























































































































































































Search results

Summary of Contents for 4924238 - P6T LGA 1366 Motherboard

Reviews:

Asus 4924238 - P6T LGA 1366 Motherboard, User Manual, Page: 55 / 182

Search results

Summary of Contents for 4924238 - P6T LGA 1366 Motherboard

Reviews: