Asus 4924238 - P6T LGA 1366 Motherboard User Manual Download Page 178

Page: 178 / 182

5-6

Chapter 5: Multiple GPU technology support

5.4

NVIDIA

SLI™ Technology

The motherboard supports the NVIDIA

SLI™ (Scalable Link Interface) technology

that allows you to install up to two identical PCI Express™ x16 graphics cards.

Follow the installation procedures in this section.

5.4.1

Requirements

•

In SLI mode, you should have two identical SLI-ready graphics cards that are

NVIDIA

certified.

•

Ensure that your graphics card driver supports the NVIDIA SLI technology.

Download the latest driver from the NVIDIA website (www.nvidia.com).

•

Ensure that your power supply unit (PSU) can provide at least the minimum

power required by your system. See page 2-36 for details.

Visit the NVIDIA zone website (http://www.nzone.com) for the latest certified

graphics card and supported 3D application list.

5.4.2

Installing SLI™ graphics cards

1. Insert one graphics card into the PCIEX16_1 slot (blue) and the other into

the PCIEX16_2 slot (white). Ensure that the cards are properly seated on the

slots.

2. Align and insert the SLI connector to the goldfingers on each graphics card.

Ensure that the connector is firmly in place.

3. Connect auxiliary power source from the power supply to the two graphics

cards separately.

4. Connect a VGA or a DVI-I cable to the graphics card/s.

We recommend that you install an additional chassis fan for better thermal

environment.

Summary of Contents for 4924238 - P6T LGA 1366 Motherboard























































































































































































Search results

Summary of Contents for 4924238 - P6T LGA 1366 Motherboard

Reviews:

Asus 4924238 - P6T LGA 1366 Motherboard, User Manual, Page: 178 / 182

Search results

Summary of Contents for 4924238 - P6T LGA 1366 Motherboard

Reviews: