TrojanTwo-Compact User Guide v3.8
Page | 95
14.4
Clean or replace aerosol filter
There are 2 fans that suck the ink aerosol away to a filter from the print area to prevent print quality issues
related to aerosol build up. This filter is a consumable and needs to be checked and if necessary cleaned or
replaced time and time again.
1.
Open the top right lid to gain access to the filters.
2.
The filter is in a drawer that can be pulled out upwards.
3.
To clean the filter, use compressed air to blow it out.
4.
The filter can also be washed out under the tap, but make sure it is dried before installing back.
5.
To replace filter, take it out from the drawer and replace with a clean new filter.
