Before replacing the fuse, unplug mains lead.
Procedure:
Step 1:
Unscrew the fuse holder on the rear panel with a fitting screwdriver from the housing
(anti-clockwise).
Step 2:
Remove the old fuse from the fuse holder.
Step 3:
Install the new fuse in the fuse holder.
Step 4:
Replace the fuse holder in the housing and fix it.
Should you need any spare parts, please use genuine parts. If the power supply cable of this
device becomes damaged, it has to be replaced by a special power supply cable available at
your dealer. Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply: 220 V AC, 60 Hz ~
Power consumption: 500W
DMX-512-connection: 3-pin XLR
Flash-rate: 10 Hz
Dimension: 420x410x490mm
Weight (net): 22.0 kg
Maximum ambient temperature
ta
: 45° C
Please note: Any information is subject to change without prior notice.
Summary of Contents for X-TORM 300
Page 1: ...X TORM 300...
