CAUTION!
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing!
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL
CAREFULLY BEFORE YOU INITIAL START - UP!
Introduction
Thank you for having chosen a new moving head 250. You acquired a versatile, powerful and
intelligent lighting-effect. Unpack your unit and make sure that there are no damages caused
by transportation. Should there be any, please consult your local dealer and do not take the
device into operation.
Features
Colour-system: Colour-wheel with 7 different, dichroic colour-filtres and white
•
Rainbow-effect
in both directions
•
Gobo-wheel with 7 interchangeable rotating gobos and open
•
The rotating
gobos can be turned by 360°, the adjusted position is memorized
•
High-speed rotating 4-facet
prism
•
shutter/dimmer unit allowing very smooth dimming and strobo effect 1-10 flash per sec.
•
LED display
•
Readout fixture, receiving DMX values
•
Remote reset function
•
Silent fans
cooling; 10 DMX-channels
•
Pan-movement range 530°
•
Tilt-movement range 280°
•
High
luminous-efficiency parabolic mirror and double condenser system
•
Motorized focus
controllable via DMX
•
All lenses are anti-reflection coated
•
For PHILIPS MSD 250/2 lamp
•
DMX-control via every standard DMX-controller
Operating determinations
This device is a moving-head spot for creating decorative effects. This product is only allowed
to be operated with an alternating current of 220 V, 60 Hz and was designed for indoor use
only. This device is designed for professional use, e.g. on stages, in discotheques, theatres etc.
Lighting effects are not designed for permanent operation. Consistent operation breaks will
ensure that the device will serve you for a long time without defects. Never run the device
without lamp! Do not shake the device. Avoid brute force when installing or operating the
device. The minimum distance between light-output and the illuminated surface must be more
than 1 meter. Always fix the fixture with an appropriate safety-rope. Fix the safety-rope at the
correct holes only. Only operate the fixture after having checked that the housing is firmly
closed and all screws are tightly fastened. The lamp must never be ignited if the objective-lens
or any housing-cover is open, as discharge lamps may expose and emit a high ultraviolet
radiation, which may cause burns. The maximum ambient temperature
t
a
must never be
exceeded.
Summary of Contents for X-TORM 300
Page 1: ...X TORM 300...
