Replace with NEDA 1604, 6F22, or equivalent 9V battery. Disconnect the test leads before
opening the back of the multimeter.
Fuse Replacement
Fuses will rarely need replacement and are normally only blown due to operator error. To
replace the fuses, open the battery cover by removing the rubber sleeve as well as the screws
on the back of the multimeter. Disconnect the test leads before opening the back of the
multimeter.
Replace the damaged fuse with a new one with the same ratings. This meter uses two fuses:
Fuse1: 400mA, 600V, FAST, Min. Interrupt Rating 20000A, Ø10X38mm
Fuse 2: 10A, 600V, FAST, Min. Interrupt Rating 20000A, Ø10X38mm
ACCESSORIES
1 x Owners Manual
1 x Pair of Test Leads
1 x K-Type Thermocouple
1 x Multi-Function Socket
DISPOSAL OF THIS ARTICLE
If you at some point intend to dispose of this article, please keep in mind that many of its
components consist of valuable materials, which can be recycled. Please do not discard it in the
garbage bin, but check with your local authorities for recycling facilities in your area.
1 Year Warranty Limited Warranty From AstroAI
Each AstroAI Digital Multimeter will be free from defects in material and workmanship. This
warranty does not cover fuses, disposable batteries and damage from neglect, misuse,
contamination, alteration, accident, or abnormal conditions of operation or handling, including
overvoltage failures caused by use outside the Multimeter’s specified rating, or normal wear and
tear of mechanical components. This warranty covers the original purchaser only and is not
transferable.
If this product is defective, please contact AstroAI Customer Support at [email protected].
