manualshive.com logo in svg

ASTRO U100-C, Operating Instructions Manual

Share
Download
ASTRO U100-C Operating Instructions Manual Download Page 7

7

 

Operating Manual U 110-C Controller

2.8   

Installing and coding the backplane  

The scope of delivery of every U 1xx signal converter includes a backplane to create the physical 
connection between the signal converter and the base device. Both the mains HF connections 
and the network connections are connected to this backplane. The temperature controlled fan for 
cooling the U 1xx signal converter is located on the backplane.  

2.8.1    Coding the backplane

  

To correctly define the position of the backplane, and thus the position of the related signal con-
verter in the U 100 base device, the jumper on the board of the backplane, which is described in 
the following section, must be configured.

 

Figure 1: Coding the backplane using the jumper

Note:  
An incorrectly configured jumper leads to incorrect displays in the front LEDs. 
In addition, it is not possible to display a correct position on the Web user interface!

7

Jumper position

left!

Left

Right

Middle

Jumper position

right!

No jumper!

Summary of Contents for U100-C





































Reviews:

No comments

Brands by name

Popular brands

Load more brands