11
Operating Manual U 110-C Controller
11
After successfully logging in, the network settings can be configured. These settings are:
IP address (address), sub-network mask (netmask) and standard gateway (gateway).
Changes are applied using the “Submit” button. Depending on the new allocation of the IP
addresses, it may be necessary to adapt the IP settings of the PC / laptop to ensure access to
the controller is possible.
3.4 Time configuration
The U 100-C controller provides the option of configuring the system time. Observe that UTC
(Universal Time Coordinated) is always used as a reference.
The date is entered in the column “Day”, the month in the column “Month” and the year in the
column “Year”. The time is entered in the column “Hour”, “Minute” and “Second”.
The settings are applied using “Submit”. An unwanted setting can be reset using the “Reset
form” button. In this case, the previous settings are displayed again.
Along with manual time input, an NTP time server can be entered. If the configuration is valid,
the time is received from this server. To set up this server, enter the IP address and press the
“Add” button (+) in the column “Action”. Any NTP server already set up can be removed using
(-).
Figure 7: Example view of the “Network settings”
