“User Settings” menu
Operating manual U 149 S -
Version 08-2015A
page 32
WICHTIG
:
All changes will only be applied after you have clicked on the “Submit” button
below the input mask. Click on the “Reset Form” button to delete the input values again.
Another table follows in which you can enter information for a RADIUS server. A licence is also required
for the RADIUS server function.
Figure 34: RADIUS administration
The following items of information can be entered individually:
RADIUS Server Address
RADIUS Server Port
RADIUS Shared Secret
RADIUS Server Retries
RADIUS Server Timeout
Enable RADIUS Log-in
HINWEIS
:
Users who have been configured on the device will be deactivated when a
RADIUS server is configured.
The RADIUS server must be configured accordingly. Users with the service type “Administra-
tive” are the device administrators.
When you click the checkbox “Enable Radius login”, the RADIUS function is activated if the
RADIUS server is able to be reached. If this is not the case, the RADIUS function remains inac-
tive, and the message “RADIUS logins have not been enabled because the connection check
failed” appears.
You can create a white list for all incoming IP data in a further table. In this case, only IP data will be
processed which come from a source entered in the white list.
Figure 35: White list administration
The following parameters can be specified for four IP sources respectively:
IP address
Netmask
