Page 9
Important safety information
Operating Manual HDIP1 - Version 10-2019A
All adhere to all applicable national safety regulations and
standards.
Excess mechanical loads (e.g. falling, impacts, vibrations)
may damage the insulation used to provide protection from
mains voltage.
High excess currents (lightning strike, surges in the power
utility grid) may damage the insulation used to provide protec-
tion from mains voltage.
If there is no information about intended use (e.g. operating
site, ambient conditions), or the operating manual does not
include the corresponding information, then you must consult
the manufacturer of this device to ensure that the device may
be installed. If you do not receive any information on this from
the manufacturer, do not start operating the device.
The device may only be operated in rooms in which the
permissible ambient temperature can be maintained should
climatic conditions vary (e.g. due to sunlight).
Do not install the device and external power supply unit in loca-
tions with excessive dust formation, as this may impair the
isolation from the mains voltage.
Electromagnetic compatibility (EMC)
In order to avoid malfunctions from occurring when operating radio
and telecommunications equipment, as well as other operating
units or broadcasting services, the following points must be
observed:
Before installation, the device must be checked for mechanical
damage. Damaged or bent covers or housings may not be
used.
During operation, the device must always be covered by the
components provided for this purpose. Operation with an
opened cover is not permitted.
The braided line or the contact springs may not be damaged
or removed.
Summary of Contents for HDIP 1
Page 1: ...Version 10 2019A ...
