ASTRO AstroJet 2000, Installation, Operating, And Parts Manual

Page: 46 / 62

42
Software continued…
ERROR MESSAGE PROBLEM SOLUTION
New Fields missing from layout
screen. Continued… Fields not visible in blotter area
on Layout Screen. Right click on one of the fields
that has already been positioned
and click OK on the field property
sheet an they should re-appear
Right click on one of the fields
that has already been positioned
and click OK on the field property
sheet an they should re-appear
Printing in Wrong Location on the
mailing piece Printing too far to the Left or
Right. Make sure that the size of the
mailing piece entered in the
Setup Menu is correct.
Make sure that the piece on the
Layout Screen looks EXACTLY
the way you want your piece to
look. Use the rulers to verify that
the fields are located the proper
number of inches form the
edges.
Adjust the left margin setting.
Check the product detection
sensor to verify that it is properly
aligned.
Printing Too High or Low Check image on layout screen.
Adjust the paper guide, or
individual printheads on their
mounting brackets to adjust how
far from the bottom edge of a
piece the fields are printed.