./4%$)!'2!-3),,5342!4)/.3!2%./44/3#!,%
11
)../6!4)6%(%!24(02/$5#43s$)2%#46%.4'!3&)2%0,!#%3-ONTEBELLO$,8-ONTEBELLO$,8#$ s).34!,,!4)/.).3425#4)/.3
Figure 12—Corner Framing with Square Termination (SV8HTS)
Proper Sizing of Gas Line
Properly size and route the gas supply
line from the supply regulator to the area
WHERE THE APPLIANCE IS TO BE INSTALLED PER
REQUIREMENTSOUTLINEDINTHE.ATIONAL&UEL'AS
#ODE.&0!LATESTEDITION53! OR#!.
#'!"LATESTEDITION#ANADA
NOTES:
s !LLAPPLIANCESAREFACTORYEQUIPPEDWITHA
mEXIBLEGASLINECONNECTORANDSHUTOFF
VALVESEE
Figure 36
on
Page 23
)
.
s 3EE
Massachusetts Requirements
on
Page
4
FORADDITIONALREQUIREMENTSFORINSTALLATIONS
INTHESTATEOF-ASSACHUSETTSINTHE53!
s 4HEGASSUPPLYLINESHOULD.OTBECONNECTED
to the appliance until
Step 6
Page 23
)
.
s !PIPEJOINTCOMPOUNDRATEDFORGASSHOULDBE
USEDONTHETHREADEDJOINTS
Ensure propane
resistant compounds are used in propane
applications
"EVERYCAREFULTHATTHEPIPE
compound does not get inside the pipe.
s )TISRECOMMENDEDTOINSTALLASEDIMENTTRAP
INTHESUPPLYLINEASCLOSEASPOSSIBLETOTHE
APPLIANCESEE
Figure 36 on Page 23
)
.
s #HECKWITHLOCALBUILDINGOFlCIALFORLOCAL
CODEREQUIREMENTS
IMPORTANT: If propane is used, be aware that
if tank size is too small (i.e. under 100 lbs, if
this is the only gas appliance in the dwelling.
Ref. NPFA 58), there may be loss of pressure,
resulting in insufficient fuel delivery (which
can result in sooting, severe delayed ignition
or other malfunctions). Any damage resulting
from an improper installation, such as this,
is not covered under the limited warranty.
Right Side
Front Corner
Of Fireplace
Framing
6-1/4”
(159 mm)
19-5/8”
(498 mm)
Step 2. ROUTING GAS LINE
2OUTEAMM GASLINEALONGTHEINSIDE
of the right side framing as shown in
Figure
13
'ASLINESMUSTBEROUTEDCONSTRUCTEDAND
made of materials that are in strict accordance
with local codes and regulations.
!LL APPLIANCES ARE FACTORYEQUIPPED WITH A
mEXIBLE GAS LINE CONNECTOR AND SHUTOFF
valve.
(See Step 6 on
Page 22)
.
4HEINCOMINGGASLINESHOULDBEPIPEDINTOTHE
valve compartment and connected in one of the
two methods as shown in
Figure 36
on
Page 23
.
Never use galvanized or plastic pipe. Refer to
Table 6
for proper sizing of the gas supply
LINEIFBLACKIRONPIPEISBEINGUSED'ASLINES
MUST BE ROUTED CONSTRUCTED AND MADE OF
materials that are in strict accordance with
LOCALCODESANDREGULATIONS7ERECOMMEND
THATAQUALIlEDINDIVIDUALSUCHASAPLUMBER
ORGASlTTERBEHIREDTOCORRECTLYSIZEANDROUTE
the gas supply line to the appliance. Installing
a gas supply line from the fuel supply to the
appliance involves numerous considerations of
materials, protection, sizing, locations, controls,
pressure, sediment, and more. Certainly no one
UNFAMILIARANDUNQUALIlEDSHOULDATTEMPTSIZING
or installing gas piping.
Figure 13
Schedule 40—Black Iron Pipe
Inside Diameter (Inches)
Schedule 40 Pipe
Length (feet)
Natural
Gas
Propane
Gas
0–10
10–40
40–100
100–150
150–200
Table 6
C
Back wall of chase/enclosure
(including any finishing materials)
D
A
B
Model
A
B
C
D
40 in.
in.
50-5/8
83-5/8
59-1/8
41-7/8
mm
1286
2124
1502
1064
45 in.
in.
56-3/4
89-7/8
63-1/2
44-7/8
mm
1441
2283
1613
1140
