Astria.US.com
127331-01A
11
OPERATION
Continued
TO TURN ON APPLIANCE
1. Slide shut off plate open by pulling plate handle out. See Figure
10. Plate must be fully opened when burner is ON.
2. Position ignition handle (located on the left hand side) clockwise,
press igniter button simultaneously until fuel is ignited, see Fig-
ure 10. At cold start, flame might not be too visible. It requires
approximately 5 minutes of operating time before flame pattern
stabilizes. Always check for heat around the area.
Note:
The Igniter operates with a 9V battery (supplied). Check
battery periodically. Replace battery if needed by unscrewing
battery compartment cap (see Figure 10).
TO TURN OFF APPLIANCE
1. Slide shut off plate fully closed by pushing plate handle in com-
pletely and make sure flame is totally extinguished. Pull plate
handle out after 10 seconds to prevent ethanol vapor to build up.
TO RE-LIGHT APPLIANCE
1. Wait approximately 10 minutes before re-lighting the burner
and make sure ethanol vapor had already dissipated.
ETHANOL
VAPOR MAY BUILD UP CAUSING HARSH IGNITION!!
.
Note:
This appliance is equipped with an ignition safety shut
off switch which will prevent igniter to operate until proper
temperature of burner is achieved.
Figure 10 - To Turn ON Appliance
Battery
Compartment
Cap
Igniter
Button
Igniter Handle
Shut Off
Plate
Handle
