Astria.us.com
126653-01_E
16
Canadian code CAN/ULC-S610-M87 and other pertinent codes
require stainless steel chimney for the installation of this
fireplace. A Cold Air Climate Kit is also required in Canada and
is recommended for cooler regions in the United States. Below,
find a list of approved stainless steel parts.
Chimney Parts List for Canada
Catalog
No.
Model No.
8" Hi-Temp
Woodburning Chimney
F0953
12-12HT
12" Section Double Wall Pipe
F0954
18-12HT
18" Section Double Wall Pipe
F0955
24-12HT
24" Section Double Wall Pipe
F0956
36-12HT
36" Section Double Wall Pipe
F0957
48-12HT
48" Section Double Wall Pipe
F0958
30E-12HT
30" Offset and Return
F0959
12S-12HT
Chimney Support
F0960
RLT-12HT
Round Top w/ Louvers
F0961
AP-12HT
Anchor Plate/Collar Assembly
(Masonry Fireplaces)
F0951
CAK-12
Cold Air Collar Kit
*When ordered alone, this part cannot ship via parcel delivery
services.
IMPORTANT NOTICE
A manufactured shroud which has been approved by
a national testing agency for use with this fireplace
may be used if installed in accordance with the in-
structions by its manufacturer. A locally fabricated
shroud may be used with IHP Shroud Leg Spacer Kit
(SLK) in accordance with instructions provided with
the shroud.
NOTICE: The firebox canopy (hood) must not be modi-
fied or replaced with a canopy that may be provided
with the unvented decorative room heater.
CAUTION: THE STRUCTURAL INTEGRITY OF THE
MANUFACTURED HOME FLOOR, WALL, AND CEIL-
ING/ROOF MUST BE MAINTAINED.
WARNING: DO NOT INSTALL IN SLEEPING ROOM OF
MOBILE HOMES.
IMPORTANT NOTICES - CANADA
