Operation
900697-00E 10/2018
Innovative Hearth Products
Altair™ Series Direct-Vent Gas Fireplaces
55
Installing the Altair™ Series 40” and 45” logs
The logs have notches/tabs to assist proper positioning. Upper logs rest on lower logs via notches/tabs. Proper log
placement is critical to prevent sooting. Place the logs in the gaps between flame peaks, so they do not impinge the
flames. Follow the log placement instructions precisely.
NOTE:
Do not cover the burner ports.
Log Number
Description
1
Bottom Rear Log
2
Upper Left Rear Log
3
Upper Right Rear Log
4
Middle Left Log
5
Front Left Log
6
Front Right Forked Log
7
Upper Right Forked Log
Catalog number for the entire set:
J8300 - 40”; J8302 - 45”
1.
If necessary, remove the glass door (Pages 57-58).
2.
Position the rear log #1 (Figures 51) on the two rear setting pins shown in Figures 50.
Figure 49 - Locate log setting pins
Figure 50 - Place log #1
3.
Place the left rear log #2 (Figure 52) over the 2 left pins on log #1 (Figure 51).
4.
Place the upper right rear log #3 (Figure 53) over the 2 right pins on log #1 (Figure 51).
Figure 51 - Place log #2
Figure 52 - Place log #3
Table 36 - 40” and 45” Log Sets
The setting pins, indicated by the arrows, are for the middle and rear log.
2
3
4
1
2
3
5
7
6
1
Grate
f i r e - p a r t s . c o m
