- 39 -
Note: This menu is only available when TV signal source is used.
ECO Mode
Press
ECO
on the remote controller to enter the ECO mode (ECO-Auto-Standard). Press
this button to switch among the three modes.
The power consumption will be halved under the ECO mode.
Under the Auto mode, the display will automatically adjust the brightness of the
screen according to the light from the environment.
When the surrounding light is
strong, the screen will bright up. When the surround light is weak, the screen will
darken.
Under the Standard mode, the screen brightness will stay the same.
Note: To save energy, please switch off the panel when it is used; and switch the
panel to Listen Alone when you do not need to watch the display, thus cutting power
consumption.
Serial Port Control
The RS-232 port of the interactive panel is defined as follows:
Connect RS-232 port to the PC or controlling device.
Enable RS-233 serial port connection and complete the
following configuration.
Summary of Contents for AVSN Series
Page 1: ......
Page 4: ...4 Ventilation...
Page 26: ...26 Touch AOSP and configure functions as follows...
