- 3 -
WARNING NOTICES
The power supply voltage is 240V AC & is high enough to cause personal injury.
Do not use any types of power cable other than an approved Australian IEC cable
to prevent the product from being damaged.
Do not open the enclosure unless you are an authorised service engineer.
Check if the electrical supply power socket voltage is 240V AC 50 Hz, that complies
with the product’s receiving power supply before use. Disconnect the product from
the power supply if the product is not to be used in a long period of time.
Disconnect the product from power supply and stop using it if you sense any
abnormal sound or smell emitted by the product. Contact your supplier for
advice and/or service.
Do not let any liquid and metal object go into the product. If any liquid or metal object
goes into the product, cut off the power and contact your Dealer or ABI for advice
and/or service.
Do not place the product on an unstable stand, bracket or table. Otherwise, it may fall
off and cause personal injury. A range of stands & brackets designed for this product
are available from your supplier.
When on a mobile stand, move the product carefully to prevent it from being knocked
or bumped in any way. This may cause damage to the panel and/or injury.
Mount the product as instructed and using only mounting accessories recommended
by the manufacturer.
When wall mounting, the touchscreen should be mounted on a solid wall that can
bear over four times of the weight of the panel. Ensure proper ventilation. You
should assess the bearing capability of the wall before mounting the product on a
special wall such as a steel-structure, plasterboard, glass, etc.
Summary of Contents for AVSN Series
Page 1: ......
Page 4: ...4 Ventilation...
Page 26: ...26 Touch AOSP and configure functions as follows...
