2
2
1c
1b
Your new automatic pool cleaner contains:
- The robotic pool cleaner with its floating cable.
- The Power Supply (transformer).
Operating the Pool Cleaner
Please read this manual completely before operating your pool
cleaner.
Place the power supply (transformer) at least three meters / ten
feet from the pool.(fig.1). The transformer will supply low voltage
to the cleaner.
Uncoil the cable.(fig.2)
Place the unit in the water. Turn the unit side to side in the water
to allow air to escape from the body and then let the cleaner sink
to the bottom of the pool (fig.3). Then, spread the cable over the
surface of the pool as evenly as possible (fig.1).
Plug the cable into the power supply. Make sure the key on the
plug exactly corresponds with the key slot on the socket of the
power supply (fig.1b).
Plug the power supply into a grounded outlet. Ensure that the
electric outlet has been properly grounded (fig.1c). The light will
glow indicating that the system is “ ON “ and the pool cleaner will
start the cleaning cycle.
WARNING:
A Ground Fault Current Interrupter (GFCI-
USA) or a Residual Current Device (RCD-EUROPE) must
be installed to protect your electric outlet and prevent any
possible electric shock.
3
1
Summary of Contents for Robotic Poll Cleaner
Page 1: ...BK0000911...
