13
QG50 robotic cleaner
owner’s Manual
12
QG50 robotic cleaner
owner’s Manual
2.
Starting at one of the wheels, pull on the inside of the
track to separate the tire lip from the wheel. Remove
the track from the cleaner.
3.
To install a new track, place the inside rib of the track
into the groove in the first wheel. (See Figure 32).)
4.
Stretch the track around the second wheel
(see Figure 32). Push and position the rib of the track
so that the track is seated properly in the groove of the
wheel.
5.
Verify the rib of the track is positioned properly within
the groove of each of the wheels. If necessary, turn the
wheels gently to seat track.
Figure 32. Stretch Track Around Wheels
Section 6. Maintenance
6.1
Using the Information LED
The information LED
on the control unit flashes in
a specific sequence to indicate one of three possible
cleaner malfunctions.
LED
Flashing
Solution
1 Flash
LED flashes
once with
one second
interval.
•
Unplug the floating cable from the
control unit and reconnect.
• If the problem persists, contact your
local retailer to request a diagnostic
review or call AstralPool Technical
Support 1300 186 875.
2 Flashes
LED flashes
twice with
one second
interval
• Turn cleaner wheels to ensure they
are not jammed.
• Check brushes for debris.
• Start a new cleaning cycle.
• If the problem persists, contact your
local retailer to request a diagnostic
review or call AstralPool Technical
Support 1300 186 875.
3 Flashes
LED flashes
three times
with one
second
interval
•
Clean the filter canister.
• Check the pump axis for debris.
• Check propellor for debris.
• Start a new cleaning cycle.
• If the problem persists, contact your
local retailer to request a diagnostic
review or call AstralPool Technical
Support 1300 186 875.
