INSTALLATION
About its installation, it is very simple to install Aquarmony as it is available in two versions: for the swimming
pools that are already operating and for the swimming pools under construction.
About the first version, it does not require any intervention as the underwater loudspeaker is plunged into water
by a cable and connected to the amplifier system. It is pulled out of the water after its utilization.
Concerning the fixed installation for the swimming pools under construction, Aquarmony is set in the lamp niches.
The loudspeaker can be supplied with the assembling kit in order to make its installation very easy. Moreover,
Aquarmony is provided with the plastic rings to be fixed better in the niche.
Aquarmony loudspeaker works at best if the
middle of the niche is at 40 cm depth from the
water surface.
In any case, it’s advisable not to install the
loudspeaker at more than 60 cm depth.
Aquarmony must be completely plunged into
water, it doesn’t spread music outside water.
To spread music outside water it’s necessary to
install loudspeakers appropriate to the
environment and to the specific requirements.
Edge of the swimming pool
4
0
c
m
Example of installation of the niche
It’s necessary to install the
loudspeaker at 40 cm depth