Astralpool APH3 INVERBOOST, User And Service Manual, Page: 38 / 314

- 34 -
7.6.2 Press 5S and then press to check the parameter from P0-P7.
7.6.2.1 When there is on one parameter checking, Press again, and then press or to setting relative
parameter.
7.6.2.2. When there is on parameter checking Current time , Press again to set the HOUR, then press
or to adjust
“
HOUR
”
from 0-23. Press once again to set the MINUTE, press or to adjust
the MINUTE from 0 to 59. and press to save the new setting.
7.6.2.3. When there is on parameter checking Timer on setting , Press again to set the HOUR, then press
or to adjust
“
HOUR
”
from 0-23. Press again to set the MINUTE, press or to
adjust the MINUTE from 0 to 59. and press to save the new setting.
7.6.2.4. When there is on parameter checking Timer off setting , Press again to set the HOUR, then press
or to adjust
“
HOUR
”
from 0-23. Press again to set the MINUTE, press or to
adjust the
“
MINUTE
”
from 0 to 59. and press to save the new setting.
Code Name Range Default Remark
P0 Mandatory defrosting 0-1 0 0: defrosting mode;1: mandatory defrosting.
P1 Working mode 0-2 1
1: heating mode,0: cooling mode, 2:Auto
mode
P2 Timer on/off 0-1 0
1:Timer on/off is under function
，
0:Timer
on/off
is out of function (The setting of P5 and P6
won’t work)
P3 filtration pump 0-1 0
1:Always running
，
0:Depends on the running of compressor
P4 Current time HH:MM 00
：
00 0-23:0-59
P5 Timer on HH:MM 00
：
00 0-23:0-59
P6 Timer off HH:MM 00
：
00 0-23:0-59
P7
T1 Inlet water temp.
correction
-9
～
9 0 Default setting: 0
P8 Debug mode 0-1 0
1:P9
，
P10
，
P11(could be adjusted)
0: automatic(not adjusted)
P9 Compressor frequency 18-110 50 Manual adjustment
P10 EEV Initial opening 0-470 350 Manual adjustment
P11 DC fan speed 300-1000 500 Manual adjustment
P12 MODBUS COM 0 - 5 0 Only Modbus function
P13 MODBUS ID Address.. 1 - 88 9 Only Modbus function
7. 7. 7. Start-up Start-up Start-up of of of the the the Heat Heat Heat Pump Pump Pump