6
S I G N A T U R E
DO
DO NOT
Transport and
storage
Verify the state of the packaging and
compliance with the stacking instruc-
tions.
Always transport the pump in the box.
Leave the box outdoors or in very damp
places.
Drag the pump.
Installation
Install on a completely flat surface.
Install below the water level of the swim-
ming pool or at a maximum height of m
(Fig. 4).
Leave space behind the fan cover to
facilitate ventilation of the pump and al-
low easy access for subsequent main-
tenance.
Use metal pipes or joints.
Connect the pump directly to the mains
water supply, as the pressure may be
very high and exceed the maximum
working pressure.
Start-up
Follow the steps described in the Pump
Installation Manual (prime the pump,
verify that the rotation direction, the
power tension and the intensity are cor-
rect, (Fig. 5 and Fig. 6).
Operate the pump without water.
Manipulate the pump without having
disconnected it from the mains power
supply.
Manipulate the selector valve with the
pump on.
Operation
Clean the pre-filter basket regularly.
Regularly clean the dirt from joints and
their seatings in order to ensure that
there is a proper seal.
If the pump does not operate properly,
review the troubleshooting table, for
possible causes and solutions.
Exceed the pump’s maximum working
pressure.
Use highly concentrated chemical prod-
ucts as the may damage the pump’s
components.
We reserve the right to change all or some of the characteristics of our products or also the content of
this document without notice.
10. DO AND DO NOT
