Astra Games Limited Machine Service & Maintenance Manual Sonic Ticket Winner
Issue D Page 15 of 28
21/06/11
PRECAUTIONS DURING ASSEMBLY
WARNING
• Perform assembly work by following the procedure herein stated. Failure to comply with the instructions can cause electric shock.
• Perform assembly as per this manual. Since this is a complex machine, incorrect assembling can cause an electric shock,
machine damage and/or improper functioning as per specified performance.
• When assembling, more than one person is required. Depending on the assembly work, there are some cases in which working by
one person alone can cause personal injury or parts damage.
• Ensure that connectors are properly connected. Improper connections can cause electric shock.
• Be careful not to damage the wires. Damaged wires may cause electric shock or short circuit or present a risk of fire.
• Do not unnecessarily push the display screen.
• This work should be carried out by site maintenance personnel or other qualified professionals. Work performed by non-technical
personnel can cause a severe accident such as electric shock. Failing to comply with this instruction can cause a severe accident
such as electric shock to the player during operation. If no one with proper technological expertise is available, request service from
the office indicated in this document or the point of purchase so as to ensure safety.
• Provide sufficient space so that assembling can be performed. Performing work in places with narrow space or low ceiling may
cause an accident and assembly work to be difficult.
• To perform work safely and avoid serious accident such as the cabinet falling down, do not perform work in places where step-like
grade differences, a ditch, or slope exist.
• This product does not use any connectors other than those connected to and used by the game board when it leaves the factory.
Do not needlessly connect wires to unused connectors. This could lead to overheating, generation of smoke and burn related
injuries.
PRECAUTIONS WHEN MOVING THE MACHINE
WARNING
• Always disconnect the power cable before moving the product. If it is moved with the power cable connected, the cable could be
damaged, causing fire or electric shock.
• To move the unit over the floor, pull in the adjustors and have the casters contact the floor. While moving the unit, be careful that
the casters do not roll over the power cord or the ground wire. If cord or wire is damaged, there could be electrical shocks and/or
short circuits.
• When crossing a sloped or stepped area, always have the machine travel lengthways. Travelling with the machine in a sideways
position could result in the machine falling over onto its side. Always use a minimum of two people working together plus lifting
apparatus to accommodate slopped areas or stairs.
• To lift up the cabinet, hold it at the bottom at the designated lifting points. If you hold it anywhere else, the weight of the cabinet
could cause damage to parts or attachments, resulting in injury.
• Do not push the cabinet from the side when moving. Pushing from the side as it may result in the cabinet falling over.
