Astr
a Ope
ration Manu
al: E
spre
sso Mach
ine
s & Ste
ame
rs
p.
13
5
. “A0” Settings 1-4
(Not Recommended)
(Programming settings only intended for technicians)
• To skip past these settings, press the “Set” button several times until you return
back to the home screen.
• Do NOT change these values unless you have the qualified information to do so.
• If you accidentally change these values, the factory default values are: A01-0, A02-0,
A03-0, A04-1.
Foaming milk can be divided into three basic steps:
1
. Fill a 32 oz. steaming pitcher 1/3 full of cold milk. Place the tip of the steam wand
1/2” below the surface of the milk.
2
. Open the steam valve just enough to create turbulence to produce foam.
3
. As foam begins to rise, lower the pitcher so that the tip of the wand is always
about 1/2” below the surface of the milk. As foam nears the top, insert the wand
into the milk to bring the product to proper temperature.
Milk foams better when cold. After making drinks, it is important to return the unused
milk to the refrigerator right away.
* For quality, it is suggested not to use the milk again once it has been heated once.
FOAMING OR FROTHING MILK