3.
Fit the Cable
a.
The AT200 is supplied with a 3-way power / ignition cable (basic kit) or a 9-way cable
(standard kit). Connect the supplied cable to the device 16-way connector.
3-way basic cable
9-way standard cable
4.
Hook up the electrical connections
a.
Connect the RED and BLACK wires to a PER12V/+24V vehicle power source
via a 3A fuse. Connect the ignition sense input (Digital 1) to an ignition switched
12/24V signal (i.e. something that only goes live when the vehicle ignition is ON) via a
3A fuse
i.
RED
+12 / +24V
1A FUSED
ii.
BLACK
GROUND
1A FUSED
iii.
WHITE
IGNITION
1A FUSED
b.
We recommend that all connections should be soldered to ensure reliable
terminations. Crimps and IDC type terminations can be unreliable if used with the
wrong tooling and/or wires sizes.
c.
All unused wires should be insulated to avoid undesired behaviour.
