Operating instructions Nivano height adjustable changing
table
Product description.
The Nivano CTe is powered by a 30 Volt Mains supply internaly reduced to 4Vdc
And is provided with a backup battery.
The changing table is intended for showering and changing children and adults, weighing up 135
KG, the changing table must not be used for any other purpose.
Carry out the following checks daily; before using the changing table.
Check the mains supply is connected and turned on..
Check there are no obstructions or items that may be trapped when the changing table is operated.
Check the changing table will raise and lower properly using the handset.
Check the function of the bed retaining catch.
Instructions for use.
Before use check that the changing table will lift and lower
using the handset. (FIG 1)
Adjusting the height of your changing table
The changing table is operated with a two-button handset.
Pressing one of the buttons will either raise or lower the
changing table as required.
Position the table at a convenient height to transfer the
client.
Using the platform
To release the changing platform push down the green
(Fig ) latch on the right hand side of the platform. Once
the latch is released, rotate the platform forward into a
horizontal position. To stow the platform simply rotate the
bed upwards until the bed is parallel with the cover, the
latch will engage and will stop the bed from falling forward.
Caution
The heavy use of oil based products may adversely affect
the white stretcher material. Oils and other petrochemical
products should be avoided and any residue removed
immediately.
These products include : Baby oil and emollient creams,
If the system fails to raise or lower.
Check the mains supply is connected and turned on..
Fig 1
Fig 2
Summary of Contents for Nivano CTe
Page 7: ... ...
