ASSEMBLY INSTRUCTIONS
Carefully remove the contents from the package. If any parts are missing
do not attempt to use the product until they have been obtained and
correctly installed.
Caution: Do not over tighten fasteners.
PARTS & HARDWARE LIST
PART #
DESCRIPTION
QUANTITY
A
1
Table Top
B
1
Leg Assembly Part 1
C
1
Leg Assembly Part 2
D
4
Wing Nut
E
1
Plastic Center Hole Bushing
2
. (See Figure 2) Turn the leg assembly (B)
upside down so that the holes at the top
of the assembly slides onto the threaded
studs that are pre-mounted underneath
the table top (A). Attach the wing nuts
(D) to the threaded studs and
tighten securely.
1
. (See Figure 1) Place the table top (A)
upside down on a non-scraching surface.
3
. (See Figure 3) Slide the Plastic Center
Hole Bushing (E) onto the center hole
ring of leg assembly (C) repeat 2nd step
with Leg Assembly (C). The center
support holes should fit flush together.
Attach the wing nuts (D) to the threaded
studs and tighten securely.
4
. (See Figure 4) Turn the assembled table
right side up.
Note:
All four legs should sit flat.
If the table rocks, you have
the leg assemblies mounted
in reverse order.
If so, repeat step 2 reversing
the placement order of the
legs.
A
B
C
D
FIGURE 2
FIGURE 3
FIGURE 4
FIGURE 1
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER. CONTACT CUSTOMER SERVICE AT
1-888-424-3354.
A
A
B
E
A
D
D
E
C
