1. Connect the pump (E) to the lid (D) and fountain assembly (A) as pictured. Place the
pump (E) into plastic liner (C) and fill with 6" of water and close with lid (D).
2. Place the plastic liner with fountain assembly into the copper base (B), and cover
lid with decorative rocks (F). Gently adjust leaves to ensure proper flow of water.
3. Do not plug in pump before filling container with water. Doing so may damage pump.
4. Use distilled water, if possible to fill container.
5. To adjust speed of water flow: unplug pump, remove lid, move switch on pump (E)
toward "+" positive to increase water flow, or "-" to decrease water flow.
6. Check water level periodically, add water if necessary.
7. If water is not flowing, check pump (E) or fountain assembly (A) for clogs. Pump may
build up calcium after a long period of time and stop running when tap water is used.
Any calcium remover can be used to clean pump.
PARTS & HARDWARE LIST
PART #
DESCRIPTION
QUANTITY
A
1
Fountain Assembly
B
1
Copper Base
C
1
Plastic Liner
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER. CONTACT CUSTOMER SERVICE AT
1-888-422-7800.
Carefully remove the contents from the package. If any parts are missing do
not attempt to use the product until they have been obtained and correctly
installed.
Caution: Do not over tighten fasteners.
ASSEMBLY INSTRUCTIONS
Figure 1
D
1
Lid
E
1
Pump
F
1
Bag of Decorative Rocks
A
B
C
D
E
F
• Connect pump to lid (part "B" of part "A" of pump)
as pictured.
• Do not plug in pump before filling container with water.
Doing so may damage pump.
• Use distilled water if possible to fill container.
• Gently adjust leaves to ensure proper flow of water.
• To adjust speed of water flow:
unplug pump
remove lid
Move switch (part "C" of pump) toward "+" positive to
increase water flow, or "-" negative to decrease water flow.
• Check water level periodically, and add water if necessary.
• If water is not flowing, check pump or tall stem for clogs.
• Pump may build calcium of a long period of time and stop
running running when tap water is used. Any calcium
remover can be used to clean pump.
Instructions
PUMP
CORD
COPPER STEM
A
B
C
E
D
F
D
A
E
