background image

verification that the Product arrived in a good and acceptable condition);

and (b) clearly notate damage on the delivery acknowledgment receipt.

Failure to do so, and any damage discovered to glass or acrylic panel

after delivery, will be repaired or replaced at the sole discretion of Aston
Global.

THIS WARRANTY DOES NOT COVER:

1. Product installed in buildings other than single family dwelling units.

2. Product installed outdoors or any other non-standard bathroom location.
3. Component parts not manufactured by Aston Global.
4. Workmanship of any installer of Aston Global Product. This warranty does

not  assume any liability of any nature for unsatisfactory performance caused
by improper installation, or any damages to property resulting from improper

    installation or use of the Products, including but not limited to flooring,

subfloor, tile, walls, sheet rock, concrete board, paint, plumbing fixtures and
ceilings.

5. Labor costs incurred in the removal, disassembly, reassembly, or installation

of the Product(s), including replacement Products issued under the Warranty,
or costs for transportation to Aston Global, and any other materials necessary
to return Product to Aston Global.

6. Any Product that has been damaged as a result of being improperly serviced

or operated, including, but not limited to, the following: operated with

insufficient water; allowed to freeze; subjected to flood conditions; operated

with water conditions or additives which cause unusual deposits or corrosion

in or on the Product, or subject to any other abuse or negligence.

7. Any Product that has been damaged as a result of natural disasters,

including, but not limited to, lightning, fire, earthquake, hurricanes, tornadoes

or floods.

8. Product used for any purpose other than residential bathroom usage.

LEGAL DISCLAIMERS

ALL IMPLIED WARRANTIES, INCLUDING WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE
HEREBY DISCLAIMED IN THEIR ENTIRETY WITH RESPECT TO ALL
PURCHASERS OR OWNERS. FAILURE TO RETURN THE WARRANTY

CARD SHALL HAVE NO EFFECT ON THE DISCLAIMER OF THESE IMPLIED

WARRANTIES. ALL EXPRESS WARRANTIES SHALL BE LIMITED TO THE

DURATION OF THIS EXPRESS LIMITED WARRANTY AND EXCLUDE ANY
LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES RESULTING
FROM THE BREACH OF ANY EXPRESS WARRANTY. Some states do not

14

Summary of Contents for MT620-R


















Reviews: