Aston Global ADP-2000L, User Manual

Page: 11 / 24

Aston Technologies Inc. www.astontechusa.com
- 11 -
5.1.1 Self-calibrating with a tire balanced
1. First press the keys R & START, the
display board displays “CAL” -- “CAL”. Indicator
LEDs blink, release the keys after indicator
LEDs go out.
2. Then press the key START, the wheel
rotates and automatically brakes, the display
board displays “ADD” -- “100”, place 100g
balancing weight at any position on the outside
of the wheel and the rim edge .
3. Then press the key START, the wheel
rotates and automatically brakes, the display
board displays “END” -- “CAL”, which indicates
that self-calibration ends.
4. Press the key START again, if displaying
“00” -- “100” (±4g) and outer indicator LEDs
blink, 100g balancing weight should be beneath
the main shaft (allow having ±4° error), which
indicates that self-calibration succeeds.
Judging self-calibration accuracy
1. Display numerical value accurately (allow having ±4° error).
2. Display phase position accurately (outer indicator LEDs blink,100g
balancing weight is beneath the main shaft and allow having ±4° error).
5.1.2 Self-calibrating with a tire unbalanced
1. Repeat the operation 5.1.1, 100g lead block is not beneath the main shaft,
the value displayed has error.
2. Remove 100g lead block, balance the wheel (see chapter 4.5), until a
zero (0) appears in the inner and outer LEDs window.
3. Repeat the operation 5.1.1 again, if displaying “00” -- “100” (±4g) and
outer indicator LEDs blink, 100g balancing weight should be beneath the
main shaft (allow having ±4° error), which indicators that self-calibration
succeeds.
5.1.3 Self-calibration trouble shooting
Troubles Reasons Solutions
Display Err, -8- 1. Do not place 100g
lead block. 1. Place 100g lead block.
2. Check and connect.