Astivita ASTWINE24, Manual

Page: 7 / 13

7
Installation method
1, set in the cabinet position, the hole should be the appropriate size of the cooler body
smoothly embedded square hole in the side of the requirements
Hole size chart at right shows:
Product installation size table
Model Hole Size
W566*H446*D618(The buckle 5mm, Under the buckle 3mm)
2.Wine cooler installed in the cabinet, there must be a reliable fixation, requires cooler holes
in the door frame around the sides, marked screws.
Product Note
1, before the first of the use of wine cooler interior cleaning
2, wine placed leveling, after cleaning, the first not power on, let stand for 30 minutes or
more wine and then power, to ensure Jean-Paul freezer normal operation
3, under normal circumstances do not disable the bar, so as not to affect the wine life. After
unplugging the power, for at least five minutes interval, To turn on the power again
4, Do not disconnect the power supply wine cooler, wine cooler because power failure will
cause the temperature to rise, and will shorten the shelf life of liquor and Reduce the quality
of its drinking
5, when the storage of liquor, should retain a certain gap between the bottle and the air
circulation in favor
6, is strictly prohibited rinse body, do not use gasoline and other organic solvents to clean
the body.
7, if the power cord is damaged, in order to avoid dangerous and must, professionals in their
maintenance department or similar sectors replaced by the manufacturer.
8, all of the electrical outlets must have reliable grounding.
ASTWINE24