Astell & Kern KANN CUBE PPM42 User Manual Download Page 8

Miscellaneous

   

57

User Guide

Certifica- 

tions

KC / FCC / CE / TELEC
Class B Device (Communication equipment for residential 
use): This is a Class B Device and is registered for EMC 
requirements for residential use. This device can be used in 
residential areas and all other areas.

FCC ID: QDMPPM42
This device complies with Part 15 of the FCC Rules, Operation is 
subject to the following two conditions: (1) this device may not cause 
harmful interference, and (2) this device must accept any 
interference received, including interference that may cause 
undesired operation.

FCC Caution: Any changes or modifications not expressly 
approved by the party responsible for compliance could void 
the user's authority to operate this equipment.

This equipment complies with RF exposure requirements set forth for 

an uncontrolled environment.

b) For a Class B digital device or peripheral, the instructions furnished 

the user shall include the following or similar statement, placed in a 

prominent location in the text of the manual: NOTE: This equipment

 

has 

been tested and found to comply with the limits for a Class B digital 

device, pursuant to part 15 of the FCC Rules. These limits are designed 

to provide reasonable protection against harmful interference in a 

residential installation.

This equipment generates, uses and can radiate radio frequency 

energy and, if not installed and used in accordance with the 

instructions, may cause harmful interference to radio communications. 

However, there is no guarantee that interference will not occur in a 

particular installation. If this equipment does cause harmful 

interference to radio or television reception, which can be determined 

by turning the equipment off and on, the user is encouraged to try to 

correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that 

to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Summary of Contents for KANN CUBE PPM42












Reviews: