Using the Device
46
User Guide
Bluetooth Support Specifications
Profile: A2DP, aptX HD
Device performance may be affected during Hi-Res playback.
Do not turn off the device while connected to Bluetooth.
Turn the Bluetooth device off then on in case of issue.
Pairing methods may differ for individual Bluetooth devices. Always
refer to the Bluetooth device’s instruction manual for details.
When connecting the player to a Bluetooth device, the distance
between the two must be within 20 cm. Audio quality will degrade
with longer distances and the pairing may disconnect at a distance
of 2 m (6.5 ft) or more. (Distances may vary depending on device and
environment.)
Crosstalk may be heard while using Bluetooth.
For multi-point devices, make the necessary connections prior to
use. Car audio Bluetooth connections may not be fully compatible.
Some features may not be supported and quality of playback may vary.
Malfunction, noise, and other undesirable effects may occur due to
the device's battery level and the environment.
Signal interference affects data transmission.
(e.g., holding the device while wearing a Bluetooth device, holding
the device while holding another electronic device, etc.)
If the device or Bluetooth headset's radio transmitters are
touching parts of the body, interference may occur.
Transmission strength is affected by walls, corners, partitions, etc.
Devices using the same frequencies may cause interference.
(e.g., medical devices, microwave ovens, Wi-Fi, etc.)
Areas with an excessive amount of interference or weak signals
can cause playback issues. (e.g., elevators, underground, etc.)
Removing a Bluetooth Pairing
1. Press [ ] to the right of the
paired device to go to settings.
2. Select [Remove] to complete
the process.
