ASTEL LIGHTING LXU01, Operating Instructions Manual

Page: 6 / 12

6
SET-UP
The DMX512 Interface LXU01 set-up is enabled by adjusting the DIP-switch.
DIP-switch
1-2-3-4
VALUE
OFF-OFF-OFF-OFF
0
ON –OFF-OFF-OFF
1
-
-
OFF-ON –ON –ON
14
ON –ON –ON –ON
15
DIP-switch
1-2-3-4-5-6-7-8-9
VALUE
OFF-OFF-OFF-OFF-OFF-OFF-OFF-OFF-OFF
0
ON -OFF-OFF-OFF-OFF-OFF-OFF-OFF-OFF
1
-
-
ON –ON -OFF-OFF-ON -OFF-ON –ON -OFF
211
-
-
OFF-ON –ON –ON –ON –ON –ON –ON -ON
510
ON –ON –ON –ON –ON –ON –ON –ON -ON
511
In normal operation the switches 1 - 9 define the DMX address!
Note:
• The switch 12 must be in OFF position for normal operation!
The DIP-switch is used to set-up the mode of operation and programming
DIP-switch
switches
FUNCTION
1 - 4 Parameter
5 - 8 Mode of operation
9 -10 Not used
11 Programming trigger
12 Programming mode
The set-up procedure:
1. Set the switch 12 to ON position
2. Set the programming mode with the switches 5 – 8 as described below
3. Set the parameter value as described below
4. Set the switch 11 to ON position
5. Wait for 5 seconds
6. Set the switch 11 to OFF position
7. Set the switch 12 to OFF position
DIP-switch
5-6-7-8
DIP-switch
1-2-3-4
SET-UP
OFF-OFF-OFF-OFF
0-2 Speed mode
ON -OFF-OFF-OFF
0-15 Number of addressable lights
OFF-ON -OFF-OFF
0-3 Data type
OFF-ON –ON -ON
not used Set default
ON– ON –ON -ON
1-15 Programming the light address