ASTEC Peterson 6710D, Operators Safety Manual, Page: 18 / 167

C
H A P T E R
1 M
A C H I N E
D
E S C R I P T I O N
1 6 6 7 1 0 D G
R I N D E R
O
P E R A T O R
S
A F E T Y
M
A N U A L
1 0 9 4 0 1 B
Table 1: Control Panel Controls
Icon Description Function
Horn Press to signal to others in
the area about safety events,
such as starting the engine.
Control
Power/Reset Turns on the display at
machine startup.
If the control panel fails to
power up, press for 3
seconds to reset.
Emergency
Stop Press to stop the engine
quickly in an emergency. Pull
it out before restarting.
NOTE: The LED in the middle of the button illuminates
any time an Emergency Stop button is pressed.
Engine
Engine Stop Stops the engine.
Engine Run Leave in this position while
the engine runs.
Engine Start Rotate to this position and
hold for 3 seconds to start
the engine.
Slow Idle Lowers the engine RPM.
Fast Idle Raises the engine RPM.
Clutch
Clutch Press and hold for 3 seconds
to engage the clutch.
3-Second
Delay There is a 3-second delay
between pressing the
CLUTCH
button and clutch
engagement.
STOP
3S
Conveyor Fold
Conveyor
Fold Folds the discharge
conveyor.
Conveyor
Open Unfolds the discharge
conveyor.
Discharge Conveyor
Conveyor
Start Starts the discharge
conveyor.
Feed
Feed Reverse Press and hold to reverse
the feed system at full speed
(upper and lower feed rolls).
Feed Stop Stops the feed system (upper
and lower feed rolls).
Feed Forward Turns on the feed system
(upper and lower feed rolls).
Speed is determined by the
control system.
Slow Feed Moves the feed system
slower.
Fast Feed Moves the feed system
faster.
Material Compression
Compression
Roll Down Lowers the compression roll
onto the feed material.
Compression
Roll Up Raises the compression roll.
Auto Down
Pressure Applies downward pressure
to the compression roll onto
the feed material. Press to
enable/disable.
Table 1: Control Panel Controls (Continued)
Icon Description Function
STOP