27
3.51 ALARM SETUP
Move the cursor to ALARM SETUP (Icon highlighted when
selected),press【 】to enter into setting interface.
OK
I/O CHANNEL: Each channel corresponds an I/O status, that is, when an
alarm triggered, it will activate the corresponding channel
to start alarm recording.
N.O: indicate I / O input level from high to low effective
N.C: indicate I / O input level from low to high effective
OFF: Close, not alarm
HDD LOSS: ON means it will trigger an alarm if there is no HDD,
It will issue a warning sound
HDD SPACE:ON: If the space less than 500M, there is a remark in live
view: No enough space, please change HDD after shutdown.
VIDEO LOSS: ON: when one channel has no video input, it will display
“video loss” in live view.
ALARM MANAGE: There are three items: alarm output, buzzer and post REC.
OUTPUT: when an alarm triggered, the alarm output time will be:
0 second、10 seconds, 20 seconds, 40 seconds and 60 seconds
● BUZZER: buzzer calling time setup when alarm triggered:
0 second,10 seconds, 20 seconds, 40 seconds and 60 seconds
● POST REC: post recording time setup: 30 seconds,1 minute,
2 minutes and 5minutes
● PRE REC: Pre-recording time is fixed as 10 seconds.
EMAIL SETUP: Click to go to an option to set EMAIL SETUP,
There are two options for closing and opening,
OFF: Close EMAIL SETUP options
ON : The user to set their own.
