25
Scenarios of using service interruptions:
In order to switch on a service output, e.g. A for 1 minute, press the ON button once, which will display on
this button a countdown time of 1 minute, see picture below.
Output A will be switched on for 1 minute and after this time will go to automatic operation.
In order to switch on output A for 10 minutes, press the ON button twice, which will display on this button a
countdown time of 10 minutes, see picture below.
Output A will be activated for 10 minutes and after this time will switch to automatic operation.
In the same way the output can be switched on for 30 minutes.
CAUTION!!! Service switch-on of the outputs is a very convenient tool during service or start-up operations. The
service switch-on guarantees that after a specified time it will go into automatic operation.
In order to switch on the output permanently, press the ON button four times, it will illuminate this button as
in the picture below.
After performing this action, the output will be permanently activated until further notice.
In order to switch off the output permanently, press the OFF button, it will illuminate this button as in the
figure below.
