AW12 VEHICLE INSTALLATION KIT
QUICK START GUIDE
assured-wireless.com
QSGmobile2022v1
Copyright ©2022 Assured Wireless Corporation. All rights reserved. All information provided here is subject to change
without notice. Assured Wireless and the Assured Wireless logo are property of Assured Wireless Corporation.
AW12 Modem
USB to Ethernet Converter
1
Use the included M6 screws and washers
and a Phillips #2 screwdriver to mount the
modem to the mounting bracket. (Put the
antenna ports to the edge as shown.)
2
Use the included M3 screws and washers
to mount the USB to Ethernet converter to
the mounting bracket. (Put the side with
the ethernet port to the same edge as the
modem antenna ports.)
Connect the USB-C to USB-A cable between the modem and the USB to Ethernet converter:
1
Insert the cable with the USB C connector. Insert it into the port labeled
USB
on the modem. and tighten the
thumb
screws. Be careful not to overtighten.
2
Insert the USB-A end of the
cable into the port on the
USB to Ethernet converter
labeled
Modem
and tighten
the thumb screw. Do not
overtighten.
Connect the short power cable:
1
Find the end of cable with the
light green connector. Insert
it into the port labeled
PWR
IN
on the modem. Twist to
tighten.
2
Insert the other end of the
cable into the port on the USB
to Ethernet converter labeled
PWR OUT
.
AW12 Modem
USB to Ethernet Converter
Install the bracket in the vehicle with the proper hardware. Mount securely near the power source. Where and
how you install the bracket will vary based on vehicle.
3
Mount modem and Ethernet converter on bracket
4
Connect power and communication between modules
5
Mount bracket in vehicle
