2
:: Introduction
:: KIT Features
:: Additional
:: Other Helpful Items
Associated Electrics, Inc.
26021 Commercentre Dr.
Lake Forest, CA 92630
http://www.TeamAssociated.com · http://www.RC10.com · http://twitter.com/Team_Associated · http://bit.ly/AEonFacebook
Customer Service
Tel: 949.544.7500
Fax: 949.544.7501
Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and
maintaining your new RC10 T4.2. Please take a moment to read through this manual to help familiarize yourself with these steps.
We are continually changing and improving our designs; therefore, actual parts may appear slightly different than in the
illustrations. New parts will be noted on supplementary sheets located in the appropriate parts bags. Check each bag for these
sheets before you start to build.
Features in the T4.2 Factory Team:
• Factory Team 12mm “Big Bore” hard anodized, threaded aluminum shocks with TiN “Gold” 3mm shock shafts
• VTS slipper (variable torque, multi-plate slipper with 3 drive surfaces) and high-resolution spring
• Factory Team blue aluminum steering bellcrank set
• Factory Team 12mm blue aluminum front and rear clamping hexes with hex drive wheels
• “Gull-wing” front suspension arms and updated front and rear shock towers optimized for12mm big bore shocks
• Factory Team 7075-T6 blue aluminum 0° rear hubs with oversized outer bearing
• Pro-Line Bulldog body
• CVA joints with pin retainer clips
• Ball differential with light-weight outdrives
• Factory Team carbon fiber battery strap and blue aluminum thumb screws
• Complete set of precision ball bearings
• Factory Team blue titanium turnbuckles, blue aluminum hinge pin brace, milled motor plate, servo mounts, rear ballast weight
and much more!
Your new T4.2 FT kit comes unassembled
and requires the following items for completion
(refer to catalog section for suggestions):
• R/C two channel surface frequency radio system
• AA-size batteries for transmitter
(#302 alkaline, #303 rechargealble)
• Electronic Speed Control, ESC (#29140, #29143)
• Steering servo (#29166, #29167) • R/C electric motor
• Pinion gear, size determined by type/wind of motor
• Battery charger (a peak detection charger, or LiPo compatible charger)
• 6 cell NiMH battery pack (#700) or a 2 cell LiPo battery pack (#714)
• Calipers or a precision ruler • Needle nose pliers
• Lexan specific spray paint
• Reamer / hole punch
• Cyanacrylate glue (#1597)
• Thread locking compound (#1596)
• Tires and Inserts, Fronts and Rears
Tools included:
• Allen wrenches #6950 (.050”, 1/16”, 3/32”, 5/64”)
• Molded tools #6956
• Camber gauge #1719
• Silicone Shock Fluid (Refer to catalog for complete listings)
• Body Scissors (AE Part # 1737)
• Reamer / Hole Punch
• Wire Cutters
• Hobby Knife
• FT Hex Wrenches (AE Part # 1655)
• Needle Nose Pliers
• Multi Tool (AE Part #7494)
• Soldering Iron
• Calipers or a Precision Ruler • Green Slime shock lube (AE Part # 1105)
Summary of Contents for RC10 T4.2
Page 1: ...3 13 ...
Page 30: ...30 Notes ...
