Associated Electrics Nomad-DB8 Manual Download Page 5

Page: 5 / 54

:: Quick Start Guide

:: Quick Start Guide - (cont.)

Battery Charging Steps and Safety:

Remove the battery from the vehicle before charging.

Place battery on a fire resistant surface.

Avoid any contact with water or other liquids.

Be sure to select the correct charging mode for the type

of battery you are charging.

ALWAYS

use a compatible charger for charging your batteries.

Caution: Never leave the battery unattended while charging.

Always disconnect the charger from the power source when

finished charging.

Caution: Always disconnect the battery when you are

finished driving the vehicle.

Battery Installation:

1. Install the battery with the battery wires

directed towards the front of the vehicle.

2. Install the three hook and loop straps until

snug on the battery.

Peak Detection

Quick Charger

1/17

Summary of Contents for Nomad-DB8























































Search results

Summary of Contents for Nomad-DB8

Reviews:

Related manuals for Nomad-DB8

Brands by name

Popular brands

Associated Electrics Nomad-DB8, Manual

Search results

Summary of Contents for Nomad-DB8

Reviews:

Related manuals for Nomad-DB8

Brands by name

Popular brands