Associated Electrics 90020 Manual & Catalog Download

Page: 2 / 34

:: Introduction

:: RC10B6.1 KIT Features

:: Additional

:: Other Helpful Items

Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and
maintaining your new vehicle. Please take a moment to read through the manual and familiarize yourself with the steps.
We are continually changing and improving our designs; therefore, actual parts may appear slightly different than the illustrations.
New parts will be noted on supplementary sheets located in the appropriate parts bags. Check each bag for these sheets before
you start to build.

• Easy access gear differential
• Differential height adjustment with 0, 1, 2, & 3mm insert included
• New slipper assembly for better weight balance and shock clearance
• 3-gear Lay Down Stealth® transmission for lower and more forward CG
• Heavy-duty V2 routed graphite front shock tower with tower guard
• Heavy-duty V2 routed graphite rear tower, STANDARD
• Heavy-duty V2 rear axle with 67mm bones
• V2 springs for a more reactive and nimble feel
• Innovative rear arm with molded inserts for ultra-fine lower shock mount adjustment
• Molded spur gear guard to help protect body from damage
• Front and rear anti-roll bars limit chassis roll for increased corner speed
• Battery strap allows the use of optional turnbuckle based braces
• Machined pistons included for better fit and smoother operation
• Aluminum rear clamping hex and front axle with laser etching
• Rear hubs feature large bearings and the easy-insert system to adjust camber link position and rear axle height
• One piece shock bushing to make assembly easier
• Aluminum C and D arm mount included for large range of anti-squat and toe adjustment
• Lightweight aluminum top shaft
• Factory Team upgraded ball bearing kit included (now oiled instead of greased for less drag)
• JConcepts B6 clear body and wing included

Your new B6.1 Team Kit comes unassembled
and requires the following items for completion
(refer to catalog section for suggestions):
• R/C two channel surface frequency radio system
• AA-size batteries for transmitter (#302 alkaline)
• Electronic Speed Control, ESC (#27002, 27003, 27004, 27005)
• Steering servo (#27106, #27107)
• R/C electric motor
• Pinion gear (48P), size determined by type/wind of motor
• Battery charger (a peak detection charger, or LiPo compatible charger)
• 2 cell LiPo battery pack (#27318, 27322, 27323, 27324)
• Polycarbonate specific spray paint

• Cyanoacrylate glue (CA)(#1597)
• Thread locking compound (#1596)
• Tires and Inserts, Fronts and Rears
• Wheels w/12mm Hex
Front Wheels#9690, #9691, #91572, #91573
Rear Wheels #9695, #9696, #91570, #91571

Tools included:
• Allen wrenches 1.5mm, 2.0mm
• #1113 12mm Shock Tool
• Multi-wrench

• Silicone Shock Fluid (Refer to catalog for complete listings)
• Body Scissors (AE Part # 1737)

• Reamer / Hole Punch

• Shock Pliers (#1675)

• Wire Cutters

• FT Hex/Nut Wrenches (AE Part # 1519)• Needle Nose Pliers

• FT Ballcup Wrench (#1579) • Hobby Knife

• Soldering Iron

• Calipers or a Precision Ruler • Green Slime shock lube (AE Part # 1105)

• FT Dual Turnbuckle Wrench (#1114) • FT Universal Tire Balancer (#1498)

Associated Electrics, Inc.

26021 Commercentre Dr.