16
:: Bag 9 - Step 4
:: Bag 9 - Step 3
:: Bag 9 - Step 2
91480
12x23mm V2
Shock Bodies
(front)
91481
12x27.5mm
V2 Shock
Bodies (rear)
91495
V2 Shock
Hat Bushing
91495
V2 Shock
Spacer
91493
X-Ring
31327
VCS3 Shock
Bottom Cap
31327
VCS3 Shock
Bottom Cap
O-Ring
91491
12mm
Shock Cap
O-Ring
x2
x2
#1105
green slime
Lightly rub shock oil
on the o-ring before
installation!
There is a short and
long shock eyelet.
Front shocks use
the short eyelet.
Rear shocks use
the long eyelet.
Racers Tip:
Coating the o-rings
with green slime
(#1105) helps seal
& reduce o-ring
swell!
Green slime
not included in kit!
!
!
#1105
green slime
91820
Shock Eyelet
Front Shocks - Short
Rear Shocks - Long
91819
Shock
Pivot Ball
Short / Long
Front Shock: 40 wt
#5423
Rear Shock: 30 wt
#5422
Shock fluid
Steps 9-10
Step 8
Steps 6-7
Steps 4-5
Steps 2-3
Shock Bleeding Steps:
1.
Before assembly, get each bleed
screw and thread it 1-2 turns into
the shock cap, then remove the
screw. This will make it easier when
you are bleeding your shocks.
2.
Pull shock shaft down.
3.
Fill shock body 3/4 full with silicone
shock fluid.
4.
Slowly move the shock shaft up and
down to remove air from under the
piston.
5.
Wait for bubbles to come to surface.
6.
Fill shock body to top with silicone
shock fluid.
7.
Place a drop of oil in the cap and on
cap threads.
8.
Install cap (without bleed screw) and
tighten completely.
9.
Slowly compress shaft all the way to
bleed excess silicone shock fluid out
the hole in the cap (use rag around
shock to catch excess fluid).
10. Install M2x4mm button head
screw until snug while shaft is fully
compressed.
91492
M2 x 4mm
BHCS
91814
12mm
Shock Cap
Stroke
Front: 20mm
Rear: 28mm
Stroke
Shock fluid
91304
12mm
Threaded
Collar
91304
12mm
Threaded
Collar
O-ring
x4
x4
91814
12mm shock
spring cup
(Front - 5mm
Rear - 0mm)
91835
12mm Front
Spring, Red
(4.60lb)
91840
12mm Rear
Spring, Blue
(2.20lb)
Front:
3.50mm
Rear:
3.00mm
Build x2 front and x2 rear shocks
Racers Tip:
Use your finger to rub
shock oil on the o-ring for
smoother adjustment!
#91310 12mm Shock Spring Cups
0mm
5mm
9mm
Summary of Contents for 90020
Page 1: ......
