9
a)
Remove the front cover of each UPS
Press the cover side with LCD display, hold the other side and quickly
extract it, then extract the other side with display. (see Figure 5)
Note:
A ribbon cable connects the LCD control cover to the UPS. Do not
pull on the cable or disconnect it.
When remove the cover, Operate as the following right Figure shows
instead of the left one. (see Figure 5)
Figure 5: Extract the UPS front cover
CAUTION
A small amount of arcing may occur when connecting the internal
batteries. This is normal and will not harm personnel. Connect the cables
quickly and firmly.
b)
Connect the internal battery connector (see Figure 6). Connect red to red,
Press the connector tightly together to ensure a proper connection.
c)
If you are installing EBPS, see the following section, “Connecting
the
EBP(s),” before continuing with the UPS installation.
Figure 6: Connecting the UPS internal batteries
