8
e)
Repeat Steps 3 and 4 for the other rail assembly.
f)
Tighten the four butterfly nuts in the middle of each rail assembly.
g)
If installing optional cabinets, repeat Step 1 through Step 6 for each rail kit.
h)
Place the UPS on a flat, stable surface with the front of the cabinet facing
to you.
i)
Align the mounting brackets with the screw holes on each side of the UPS
and fix with the supplied M4×8 flat-head screws (see Figure 3).
Figure 3: Installing the mounting brackets
j)
If installing optional cabinets, repeat Step 8 and 9 for each cabinet.
k)
Slide the UPS and any other optional cabinets into the rack.
l)
Secure the front of the UPS to the rack using one M5×12 pan-head screws
and one M5 cage nuts on each side (see Figure 4).Install the bottom screw
on each side through the bottom hole of mounting bracket and the
bottom hole of the rail.
Repeat for any optional cabinets.
Figure 4: Securing the front of the cabinet
m)
Continue to the following section, “Rackmount Wiring Installation.
(2)
Rackmount wiring installation
a)
Installing the UPS, including connecting the UPS internal batteries
b)
Connecting any Optional EBP(S)
•
How to install the UPS
Note:
Do not make unauthorized changes to the ups; otherwise, damage may
occur to your equipment and void your warranty.
Note:
Do not connect the ups power cord to utility until after installation is
completed.
