30
With your finger or a pointer, touch the center
of each crosshair as it appears. Keep pressing
on each target while the prompt next to it
indicates HOLD, then stop pressing when the
prompt changes to RELEASE.
How do I calibrate the touchscreen?
1
2
The touchscreen interprets your touch and moves the cursor where you move your finger. You can adjust or
“calibrate” your touchscreen for your individual touch from the Mercury
Control Panel.
Use your finger or a stylus on the touchscreen; do not use sharp objects that can scratch or puncture it.
Click the
Setup
button on the Mercury Control
Panel (see page 11), then in the
Main Setup
tab under
Touchscreen
click
Touchscreen
Setup
.
Click the
Calibration
tab at the top of the
window, then click the large calibration target
to start calibration. (The default Calibration
Type is 4-point. If this is not appropriate, click
the
Configure
button to change the number of
points.)
3
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
(To exit this screen without
recalibrating, simply wait for the
time-out indicator at the lower
left of the screen to count down.)