Important, by pressing "panic" you close the current note and automatically return to
the first (output #1).
•
Sequence mode:
Press "Channel" and hold while pressing "Down". Release "Down" and then
"Channel". You are in sequence mode.
All the time you have your finger on "Play", the outputs will play in sequence one
after the other. Without releasing "Play" you can increase or decrease the speed with
"Up" or "Down".
By pressing "Panic" you return to normal mode.
•
Repeat mode:
Press "Channel" and hold while pressing "Up". Release "Up" and then "Channel".
You are in repeat mode.
All the time you have your finger on "Play", the selected output will repeating. You
can increase or decrease the frequency of repetition with the "Up" button and
"Down." Intractable test for slow pneumatic valves!
Change output releasing "Play" and using "Up" or "Down" as in normal operation.
You press "Panic" to return to normal mode.
Midi 32 cards working with the "limitation of notes length " setting:
Same as above except:
•
In normal mode you can not keep the note-on since, by definition, its length is
limited. This will be perfect to test the operation of a percussion instrument.
Avoid using the length adjustment of notes based on velocity.
•
In sequence mode, the wizard does not take into account the limited length of
the notes.
•
In repeat mode, the wizard does not take into account the length limitation,
however, you can increase the repetition rate to recover normal operation of the
coil for fast repetiton.
