2
Congratulations!
You have just purchased the best
spray washer on the market today.
It incorporates the very latest
in technological advances. To
assure you the best and safest
performance as well as longest
equipment life, please read the
enclosed information.
After reading the material in
this manual, should you need
assistance, please call customer
service at our toll free number
(800) 548-3373
or
(479) 636-5776
.
SPRAY MASTER SERVICE
Mon-Fri, 8:00 am - 5:00 am CST
(800) 548-3373
Spray Master Technologies will repair or replace any originally
installed parts on the Power Clean series which are found
to be defective in material or workmanship for a period of
two (2) years and on the Power Clean Go series for a period
of one (1) year from the date of shipment to the original
purchaser, excluding items listed below. The defect must
occur during normal use of the product and within the length
of warranty coverage. The repair or replacement of that part
will be provided according to the time limits of the warranty
policy. Repairs must be completed using only Spray Master
Technologies approved parts.
EXCLUDED ITEMS
The following items are covered by the above warranty for
ninety (90) days from date of shipment:
Wear Items
* - Spray guns, wands, hoses, nozzles, quick
couplers, Hummer Jet Sr. and Hummer Jet Jr. casters and
handles, check valves and chemical injectors.
The following items are covered by the above warranty for
1 year from the date of shipment:
Unloaders, Chemical Valves
†
Electrical Components
- float switch, temperature
switch, Solid-State Relay, Master Control Panel,
electronic injectors, wiring harnesses and flow
switch.
LABOR AND TRAVEL
Labor and travel to repair or replace defective parts shall be
covered for a period of 1 year from date of shipment. Labor and
travel for warranty wear items shall be covered for a period of
90 days.
ITEMS VOIDING WARRANTY
The following voids all warranty claims:
Accidental breakage;
abuse; misuse; failures caused by incorrect installation if
not installed by authorized factory representative; failure
to correctly wire the system at the electrical source;
foreign items, chemical or mineral buildup in the pumps
and water lines caused by untreated or unfiltered tap, hard
or recaptured water; excessive hot water temperatures
exceeding 150˚ Fahrenheit; failures due to injecting bleach or
harsh or corrosive chemicals; not following Owners Operation
instructions; damage due to freezing temperatures; natural
disasters, electrical surges; and, tampering, attempted
repair by unauthorized service personnel, and not following
prescribed Preventive Maintenance Program.
*Wear Items Not Covered – O-rings, gaskets, filters.
†
O-rings,
gaskets, pulse pump diaphragm, check valves or failures due to
chemical damage are not covered by this Limited Warranty.
LIMITED WARRANTY
Spray Master Technologies®
Effective May 20, 2020
