Definitions
24
80-9086-0030-010 04-21
Part of ASSA ABLOY
All Code Lockout Mode:
This feature is enabled by the Master PIN code. When enabled, it restricts all user (except
Master) PIN code access. When attempting to enter a code while unit is in Lockout, there will be an audible lock
response. The touchscreen keypad will display a RED locked padlock. (Main Menu selection #6.)
Automatic Re-lock Time:
After a successful unlock, the unit will re-lock automatically after 5 seconds or for a duration
selected in the Advanced Lock Settings (Main Menu selection #3 then #1).
Eco Mode:
When enabled, Eco Mode puts unit in low power mode extending life of battery.
Escape Return:
Enabling this function allows the door to remain unlocked in the case of an emergency. Escape Return
will cause the door to automatically unlock upon opening and remain unlocked even if the door swings closed. The
locking action requires at least one intentional user interaction to return to the locked state. Auto Re-lock cannot be
enabled when Escape Return is enabled.
Inside Indicator Light:
This light will blink red when door is locked.
Language Setting Mode:
Choose English (1), Spanish (2) or French (3) for the lock's voice prompts. (Main Menu
selection #5.)
Low Battery:
When the battery power is low, the Low Battery Warning indicator is a flashing red battery icon on the
touchscreen keypad and the Yale logo will flash red on the push button keypad. If battery power is completely lost, use
the 9Volt battery override. To use the 9V battery override apply 9V battery, in either direction, to terminals on the keypad
for backup power option. Activate the keypad and enter your pin code to unlock the door.
Master PIN Code:
The Master PIN code is used for programming and for feature settings. It must be created prior to
programming the lock. The Master code will also operate (unlock/lock) the lock except when Accentra Key Module is
installed.
Network Module Setting:
With the optional Network Module installed, this setting becomes available (Main Menu
selection #7) and allows the lock to connect with a network controller.
One Touch Locking:
When the unit is unlocked, activating the keypad will lock the unit (during Automatic Re-lock
duration or when Automatic Re-lock is disabled). When One-Touch Re-lock is not in use (disabled), any valid PIN code
will re-lock the lock. (Main Menu selection #3 then #3.)
Passage PIN Code:
When used to unlock, lock will remain unlocked/open. Lock cannot be locked/secured until
Passage code is entered again.
Privacy Button to Lock Door:
If Automatic Re-lock is disabled, a short 1 second press of this button will lock the door.
Privacy Mode:
With Privacy Mode enabled thru Menu Mode and door closed, all keypad functions can be disabled with
a 3 second press of the Privacy Button. Privacy Mode is disabled by default. Enable Privacy Mode thru Main Menu
selection #3 then #4. With door closed, press and hold the privacy button until voice prompt indicates Privacy Mode is
enabled. Privacy Mode duration ends when door is opened and voice prompt indicates Privacy Mode is disabled.
Shut Down Time:
The unit will shut down for sixty (60) seconds and not allow operation after the wrong code entry
limit (5 attempts) has been met. When the unit is in Shut down, the keypad will be flashing.
Tamper Alert:
Audible alarm sounds if attempting to forcibly remove outside lock from door.
User PIN Code:
The User code operates the lock. Maximum number of user codes is 500.
Volume
Setting Mode:
The volume setting for PIN code verification is set to HIGH (1) by default; otherwise it can be set
to Low (2) or Silent (3) for quiet areas. (Main Menu selection #4.)
Wrong Code Entry Limit:
After five (5) unsuccessful attempts at entering a valid PIN code, the lock will not accept a
PIN code for the duration of the shut down time. The touchscreen keypad will flash, and a red lock symbol will be at the
bottom of the keypad. The push button keypad will flash and the Yale icon will flash blue for the shut down period. The
keypad will be available after the shut down time is complete.
