Talleres de Escoriaza, S.A. – SAFES – USER MANUAL
Page 14 of 15
- State of the keypad (for safes with keypad only)
- State of display
To see the entire process, see the MANUAL PORTABLE PROGRAMMER
If the review of all points has been satisfactory, the safe will be working properly. If any of the test
points has been wrong, it means the suffering anomaly at that point. In this case you should contact
your dealer to analyze the problem and find the best solution.
9.2- BATTERIES CHANGE
The battery replacement is an operation that does not
involve any kind of difficulty. Simply, we must remove the
cover of the battery module, located on the inside of the
door of the safe and make the change of batteries.
It may be that the change of the batteries may provoke in
the control unit of the safe a lost of the actual date and
time for which, we should update the safe with portable
programmer, only to update the clock and calendar.
9.3- CLEANING CARD
It may be that the magnetic stripe card reader could get dirty with dust or any other substance, so
that the reading of the card them becomes difficult. To clean the head of the reader need only enter
a few times a 'cleaning card "in the reader.
A cleaning card is simply a card dimensions equal to the magnetic stripe card, with the difference
that instead of having a magnetic strip, has a band made of special material to clean the head of
the reader.
These cards can be purchased from your oficial dealer or in specialty shops.
