Assa Abloy SARGENT7800 Series Installation Instructions Manual Download Page 7

Page: 7 / 8

1-800-727-5477 • www.sargentlock.com

7800 and 8200 Series Mortise Lock

Installation Instructions

Used with Sectional Trim and V Series Indicators

Copyright © 2019, 2020, 2021, 2022, SARGENT Manufacturing Company. All rights reserved. Reproduction in
whole or in part without the express written permission of SARGENT Manufacturing Company is prohibited. Patent
pending and/or patent www.assaabloydss.com/patents.

A8257E 4/22

Figure 14

Indicator Parts List

Figure 14

Description

Part Number

Req.

Sectional Escutcheon - Cylinder

81-0742 x finish

Sectional Escutcheon - Coin Turn

82-5635 x finish

Sectional Escutcheon - Thumbturn (Standard)

82-5630 x finish

Sectional Escutcheon - Thumbturn (LB Option)

82-5631 x finish

Sectional Escutcheon - Thumbturn (T1)

82-5632 x finish

Sectional Escutcheon - Thumbturn (T2)

82-5633 x finish

Sectional Escutcheon - Thumbturn (T3)

82-5634 x finish

Sectional Escutcheon - No Input/Blank

81-0742 x finish

Indicator Window

81-0811

Indicator Display Assembly - Green Unlocked / Red Locked

82-5602

Indicator Display Assembly - Green Vacant / Red Occupied

82-5603

Indicator Display Assembly - Green Unlocked Icon / Red Locked Icon

82-5604

Indicator Display Assembly - White Unlocked / Red Locked

82-5605

Indicator Display Assembly - White Vacant / Red Occupied

82-5606

Indicator Display Assembly - White Unlocked Icon / Red Locked Icon

82-5607

Indicator Display Assembly - Green Ouvert / Red Fermé

82-5684

Indicator Display Assembly - Green Libre / Red Occupée

82-5685

Indicator Spindle Cam - Thumbturn/Coin Turn

81-0745

Indicator Spindle Cam - Cylinder/No Input / Blank

81-0756*

Indicator Spindle Cam - 05, 37, 38, 59 Function

82-5577*

Indicator Spindle Cam - 05 (Inside)

82-5673

Indicator Retaining Pad

81-0749

Sectional Indicator Screw Pack

82-5590 x finish

Sectional Indicator Mounting Plate

81-0750

Sectional Indicator Template Kit (not shown)

82-5601

* These parts are for 1-3/4

standard thickness doors. For other thicknesses, please contact factory.

Note:

Reference 8200 Series parts manual for all lock body parts.

Summary of Contents for SARGENT7800 Series









Search results

Summary of Contents for SARGENT7800 Series

Reviews:

Brands by name

Popular brands

Assa Abloy SARGENT7800 Series, Installation Instructions Manual

Search results

Summary of Contents for SARGENT7800 Series

Reviews:

Brands by name

Popular brands